The manufacturing process of high-carbon chromium bearing steel tubes manufacturer mainly includes the following steps:

Prepare materials, including stainless steel pipes, pipe joints, fasteners and insulation layers, etc.

2. Cutting and processing of stainless steel pipes: According to the design requirements or the actual situation on site, size cutting is carried out, and the irregular scraps are processed with a shears machine to meet the finished product usage standards (the cutting surface can be processed with grinding equipment to increase the flatness and aesthetics of the connection surface). For curved parts, they need to be heated to a softened state before operation. At the same time, check if the edges are smooth to avoid air leakage.

3. Installation and positioning of pipe joints: In the entire system, the components that are needed are flange fixed interfaces or clamp-type quick connection valves. This part divides the system into several independent compartments, thereby ensuring the sealing performance of the ventilation system. It should be noted that during welding, do not damage these accessories. Then, seal all the Windows and weld them firmly. Take measures to replenish water and oxygen, etc., and remove all kinds of protective facilities.

4. It is to inspect and treat the inner and outer wall surfaces to ensure they are smooth without scratches caused by friction, so as to guarantee smooth air circulation, reduce resistance loss, and facilitate cleaning and maintenance management. The stainless steel smoke exhaust duct products can only be obtained through this set of processes.

The above information of high-carbon chromium bearing steel tubes manufacturer is for reference only. The specific process may be adjusted and optimized according to actual needs. If you are unsure or have other questions, it is recommended that you consult a professional.

high-carbon chromium bearing steel tubes manufacturer https://www.torichsteel.com/Steel-Tube